Fire Extinguishers
Portable fire extinguishers are often considered the first line of defense against fires of small or limited size.
Our Services
Fire Extinguishers and Inspections
Portable fire extinguishers are often considered the first line of defense against fires of small or limited size. They can put out a fire before it gets too large and out of hand, preventing any serious and costly damage.
NFPA Requirements
The National Fire Protection Association (NFPA) states that fire extinguishers shall be maintained annually and inspected monthly.
On a monthly inspection our technicians will visually inspect the extinguisher to make sure that it is fully charged and ready to use. On a yearly inspection our technicians will make sure all the components are working properly and do a thorough cleaning. The inspection will ensure that the extinguisher is working correctly when it is need but that it also the proper extinguisher for the specific area is it covering. There are different extinguishers for different applications.
We have all the extinguishers you need no matter what the application is.
Commercial, Residential etc. We have all your needs covered.
In addition to the maintenance and inspection of your company’s fire extinguishers, we can also provide training to your employees on the use of fire extinguishers along with the visual inspection of the individual units.
Extinguisher Types
Water and Foam
Water and Foam fire extinguishers extinguish the fire by taking away the heat element of the fire triangle. Foam agents also separate the oxygen element from the other elements.
Carbon dioxide can be used on Class B & C fires. They are usually ineffective on Class A fires.
Carbon Dioxide
Carbon Dioxide fire extinguishers extinguish fire by taking away the oxygen element of the fire triangle and also be removing the heat with a very cold discharge.
Carbon dioxide can be used on Class B & C fires. They are usually ineffective on Class A fires.
Dry Chemical
Dry Chemical fire extinguishers extinguish the fire primarily by interrupting the chemical reaction of the fire triangle.
Today's most widely used type of fire extinguisher is the multipurpose dry chemical that is effective on Class A, B, and C fires. This agent also works by creating a barrier between the oxygen element and the fuel element on Class A fires.
Ordinary dry chemical is for Class B & C fires only. It is important to use the correct extinguisher for the type of fuel! Using the incorrect agent can allow the fire to re-ignite after apparently being extinguished succesfully.
Wet Chemical
Wet Chemical is a new agent that extinguishes the fire by removing the heat of the fire triangle and prevents re-ignition by creating a barrier between the oxygen and fuel elements.
Wet chemical of Class K extinguishers were developed for modern, high efficiency deep fat fryers in commercial cooking operations. Some may also be used on Class A fires in commercial kitchens.
Clean Agent
Halogenated or Clean Agent extinguishers include the halon agents as well as the newer and less ozone depleting halocarbon agents. They extinguish the fire by interrupting the chemical reaction and/or removing heat from the fire triangle.
Clean agent extinguishers are effective on Class A, B and C fires. Smaller sized handheld extinguishers are not large enough to obtain a 1A rating and may carry only a Class B and C rating.
Dry Powder
Dry Powder extinguishers are similar to dry chemical except that they extinguish the fire by separating the fuel from the oxygen element or by removing the heat element of the fire triangle.
However, dry powder extinguishers are for Class D or combustible metal fires, only. They are ineffective on all other classes of fires.
Water Mist
Water Mist extinguishers are a recent development that extinguish the fire by taking away the heat element of the fire triangle. They are an alternative to the clean agent extinguishers where contamination is a concern.
Water mist extinguishers are primarily for Class A fires, although they are safe for use on Class C fires as well.
Water Mist
Cartridge Operated Dry Chemical fire extinguishers extinguish the fire primarily by interrupting the chemical reaction of the fire triangle.
Like the stored pressure dry chemical extinguishers, the multipurpose dry chemical is effective on Class A, B, and C fires. This agent also works by creating a barrier between the oxygen element and the fuel element on Class A fires.
Ordinary dry chemical is for Class B & C fires only. It is important to use the correct extinguisher for the type of fuel! Using the incorrect agent can allow the fire to re-ignite after apparently being extinguished successfully.
Trusted throughout the Southeast
Chief Fire Protection Company is trusted throughout the southeast and has offices located in Atlanta, Birmingham and Nashville.